Stainless Steel sink with a left hand corner waste hole 54mm dia. with 70mm dia. flange.
330mm x 230mm x 180mm depth.
This sink comes with a flat flange 15 - 18mm wide.
Hole size to be cut should be 336mm x 236mm.
Can be under mounted or welded into a work top.
All sinks come with a very high quality finish.
We recomend that any holes should only be cut in to work tops when you have the sink for reference.
Please Note: Sink bowl handing is determined by having the long edge of the sink bowl running left to right in font of you.
The waste hole is furthest away from you in either the left or right hand rear corner.