Catering Equipment Ltd - for HELP call: 0121 773 2228   

Oblong Sink 330 x 230 x 180mm Deep, Right hand waste, Insert Fla[V332318DXRHI]

Oblong Sink 330 x 230 x 180mm Deep, Right hand waste, Insert Fla

Oblong Sink 330 x 230 x 180mm Deep, Right hand waste, Insert Fla[V332318DXRHI]

£57.83
Quantity :

Stainless Steel sink with a right hand corner waste hole 54mm dia. with 70mm dia. flange.

330mm x 230mm x 180mm depth.

This sink comes with an insert flange 15 - 18mm wide.

Hole size to be cut should be 336mm x 236mm.

Flange is designed for dropping into a work top.

All sinks come with a very high quality finish.


We recomend that any holes should only be cut in to work tops when you have the sink for reference.

HTM64 compliant
 

Please Note: Sink bowl handing is determined by having the long edge of the sink bowl running left to right in font of you.

The waste hole is furthest away from you in either the left or right hand rear corner.


We Accept
Manufacturers